Цена: 47.00лв  38.50лв

Няма наличност

Witty Pi 2: Realtime Clock and Power Management for Raspberry Pi - Разпродажба

 
РАЗПРОДАЖБА! НЯМА ДА СЕ ПОДДЪРЖА В НАЛИЧНОСТ СЛЕД ИЗЧЕРПВАНЕ НА КОЛИЧЕСТВАТА!
 
Комплектът съдържа:
  • Witty Pi 2 платка - 1бр.
  • Батерия 2032 - 1бр.
  • Комплект крепежни елементи
 
Допълнителна информация:
 
 
Witty Pi 2 is the second generation of Witty Pi, which adds RTC and power management to your Raspberry Pi, and can define complex ON/OFF sequence with simple script. Witty Pi 2 supports all Raspberry Pi models with 40-pin header, including A+, B+, 2B, Zero, Zero W, 3B, 3B+, 3A+ and 4B.
 
Witty Pi 2 is compatible with the newly released Raspberry Pi 4. However you will need to manually upgrade your wiringPi to version 2.52, by running these two commands:
wget https://project-downloads.drogon.net/wiringpi-latest.deb
sudo dpkg -i wiringpi-latest.deb
 
After installing the software on your Raspberry Pi, you can enjoy these amazing new features:
  • Single tap on the button to gracefully turn on/off Raspberry Pi.
  • After shutdown, the power for Raspberry Pi and all its USB peripherals are fully cut.
  • Raspberry Pi knows the correct time, even without accessing the Internet.
  • You can schedule the startup/shutdown of your Raspberry Pi.
  • You can even write a script to define complex ON/OFF sequence.
Comparing to the old Witty Pi, Witty Pi 2 uses much better RTC chip (DS3231SN), which only has <160 seconds error per year. Also this RTC chip has temperature sensor built-in, so you can read the temperature around your Raspberry Pi via the software. The new “dummy load” feature is very useful when you use power bank as power supply, it will draw peak current with certain interval, and keep your power bank alive.
 
 
PACKAGE CONTENT:
Each Witty Pi 2 package contains:
  • Witty Pi 2 board x 1
  • CR2032 battery x 1
  • M2.5 x 11mm Copper Standoff x 4
  • M2.5 screws x 8
 
SPECIFICATION:
  • Dimension: 65mm x 56mm x 19mm
  • Weight: 24g (net weight without battery)
  • LED Indicator: A white LED
  • Connector: 40-pin stackable header
  • Battery: CR2032 or CR2025 (for time keeping)
  • Power In: DC 5V (via micro USB or XH2.54 connector)
  • Output Current: Maximum 3A for Raspberry Pi and its peripherals
  • Static Current:
    • ~ 1mA in average with dummy load off (default)
    • ~15mA in average with dummy load on
  • Operating Temperature: -30℃~80℃ (-22°F~176°F)
  • Storage Temperature: -40℃~85℃ (-40°F~185°F)
  • Humidity: 0~80%RH, no condensing
 

 

  • Арт.код: 2089
  • Производител: UUGear - Чехия




Всички цени са с включен ДДС.

Copyright © 2011 - 2020 Erelement.