New
Raspberry Pi Pico 2
14.70 лв. с вкл. ДДС
В наличност
Raspberry Pi Pico 2 e развойна платка, работеща с Raspberry Pi микроконтролер RP2350 – datasheet.
Комплектът съдържа:
- Платка Raspberry Pi Pico 2 – 1бр.
Характеристики:
- MCU: Raspberry Pi RP2350 – Dual Arm Cortex-M33 or dual Hazard3 RISC-V processors @ 150MHz
- Памет: 520 KB on-chip SRAM, and 4 MB on-board QSPI flash
- Захранване: 3,3V или 5V
- Работно напрежение I/O портове: 3,3V
- Open source C/C++ SDK, MicroPython поддръжка, Arduino IDE
- Drag-and-drop запис на кода през USB
- 26 GPIO порта – PINOUT
- Размери платка: 51mm x 21mm
- Софтуерно и хардуерно е съвместим с Raspberry Pi Pico 1
Допълнителна информация:
- Raspberry Pi Documentation
- Getting Started. Ръководство
- Pinout diagram (pdf) Разположение на портовете
- Raspberry Pi Pico 2 datasheet (pdf)
- RP2350 datasheet (pdf)
Specification
Raspberry Pi Pico 2 is a low-cost, high-performance microcontroller board with flexible digital interfaces. Key features include:
- RP2350 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual Cortex-M33 or Hazard3 RISC-V processors at up to 150MHz
- 520KB of SRAM, and 4MB of on-board flash memory
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 26× multi-function GPIO pins including 3 that can be used for ADC
- 2× SPI, 2× I2C, 2× UART, 3× 12-bit 500ksps Analogue to Digital Converter (ADC), 24× controllable PWM channels
- 2× Timer with 4 alarms, 1× AON Timer
- Temperature sensor
- 3 × Programmable IO (PIO) blocks, 12 state machines total for custom peripheral support
- Flexible, user-programmable high-speed IO
- Can emulate interfaces such as SD Card and VGA
The Raspberry Pi Pico 2 comes as a castellated module which allows soldering direct to carrier boards, while the Pico 2 with headers comes with pre-soldered headers.
Pinout