New
Waveshare RP2350-GEEK Development Board – RP2350 MCU, 1.14inch IPS LCD, USB Debugging Downloader
24.00 лв. (12.27 €) с вкл. ДДС
В наличност
Комплектът съдържа:
- Waveshare RP2350-GEEK – 1бр.
- Интерфейсни кабели за трите I/O конектора – UART, SWD, I2C
Характеристики:
- Микроконтролер: Raspberry Pi RP2350A – Dual Arm Cortex-M33 or dual Hazard3 RISC-V processors @ 150MHz, 520 KB on-chip SRAM
- Допълнителна памет: Flash 16MB
- Три конектора с изведени захранващи и GPIO портове: (В комплекта има интерфейсни кабели!)
- 3PIN SWD port for connecting the debugged target board
- Standard CMSIS-DAP interface can be used to debug most ARM-based microcontrollers
- Works with OpenOCD and other tools supporting CMSIS-DAP
- Adopts the Raspberry Pi 3PIN Debug Connector Specification
- 3PIN USB to UART bridge
- 4PIN I2C port for the testing target board
- 3PIN SWD port for connecting the debugged target board
- Дисплей: цветен 65K, 1.14″ IPS, 240×135
- Захранване: с 5V от USB или с 3,3V от конектора I2C
- Работно напрежение GPIO портове: 3,3V
- Програмира се през USB (Open source C/C++ SDK, MicroPython поддръжка, Arduino IDE)
- Допълнителни: конектор за micro SD карта, USB-А Male конектор, бутон за boot, пластмасов корпус
Допълнителна информация:
- Waveshare RP2350-GEEK Development Board. Подробно описание
- RP2350-GEEK Wiki. Документация, ръководство
Board specifications
RP2350-GEEK is a geeks development board designed by Waveshare, onboard USB Type-A interface, 1.14inch LCD screen, TF card slot, and other peripherals. Provides different firmware for SWD port, UART port, and I2C port.
Key features include:
- RP2350 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Onboard 3PIN SWD port for connecting the debugged target board
- Standard CMSIS-DAP interface can be used to debug most ARM-based microcontrollers
- Works with OpenOCD and other tools supporting CMSIS-DAP
- Adopts the Raspberry Pi 3PIN Debug Connector Specification
- Onboard 3PIN USB to UART bridge
- Onboard 4PIN I2C port for the testing target board
- Onboard 1.14inch 240×135 pixels 65K color IPS LCD display
- Equipped with plastic case and cables
- Open-source firmware, more convenient to upgrade
Combines multiple functions in one
Onboard multiple interfaces and 1.14inch LCD display, compatible with multiple
debugging methods
Application Example
Connect to the debugging interface of Pico via the 3PIN SWD cable
* for reference only, the Raspberry Pi Pico 2 is NOT included.
Onboard Resources
- USB Type-A interface
- UART port
- SWD port
- I2C port
- TF card slot
Supports SDIO interface and SPI interface communication - W25Q128JVSIQ
16MB NOR-Flash - RP2350
- BOOT button
outline dimensions
