Захранващ модул 5V 5A – UPS Module 3S, Supports charging And Power output at the same time
54.00 лв. с вкл. ДДС
В наличност
Комплектът съдържа:
- Захранващ модул UPS – 1 бр.
- Двоен проводник с монтирани self-lock бутон и XH2.54 male конектор, 15см – 1 бр.
- Двоен проводник с монтирани захранваща букса (женска) и XH2.54 male конектор, 15см – 1бр.
- Двоен проводник с монтирани USB-C и XH2.54 male конектори, 15см – 1бр.
- Двоен проводник с монтирани XH2.54 male конектори, 15см – 1бр.
- Захранващ адаптер 12,6V 2A – 1 бр.
- Комплект за сглобяване на пластмасови поставка и капак за модула
Важно:
- Няма батерии в комплекта! Необходими са три броя Li-Ion батерии 18650!
- За захранване трябва да се използва включения в комплекта адаптер 12,6V 2A, който се включва към UPS HAT модула!
- НЕ ВКЛЮЧВАЙТЕ ЗАХР. АДАПТЕР, АКО СВЕТИ НЯКОЙ ОТ СВЕТОДИОДИТЕ ЗА НЕПРАВИЛНО ПОСТАВЕНИ БАТЕРИИ – доп.инфо!
Характеристики:
- Непрекъсваемо захранване 5V, подходящо за Raspberry Pi, Nvidia Jetson и други устройства работещи на 5V – роботи, шасита, MCU boards и т.н.
- Изходни напрежения:
- Директно от батериите: 9V~12,6V (конектор BAT)
- 5V с ток до 5А
- 3,3V с ток до 600mA
- Работи с три акум.батерии Li-Ion 18650 (НЯМА БАТЕРИИ В КОМПЛЕКТА!)
- Захранва се и се зарежда с напрежение 12,6V 2A (Има захранващ адаптер в комплекта!)
- Сензори за наблюдение на напрежението и консумирания ток от батериите. Работят с I2C интерфейс, изведен на конектора за 3,3V изход – I2C pinout.
- Защита срещу презареждане/разреждане, защита от пренапрежение, защита от късо съединение и индикатор за неправилно поставени батерии (ВАЖНО: НЕ ВКЛЮЧВАЙТЕ ЗАХР. АДАПТЕР, АКО СВЕТИ НЯКОЙ ОТ СВЕТОДИОДИТЕ ЗА НЕПРАВИЛНО ПОСТАВЕНИ БАТЕРИИ – доп.инфо)
- Размери платка: 93mm x 60mm
Допълнителна информация:
- Uninterruptible Power Supply Module, Supports charging And Power output at the same time, 3S & 5V 5A. Подробно описание
- Wiki. Ръководство
What’s On Board:
Chips
- S-8254AA
Li battery protection - SY8286
5V voltage regulator - HY2213
Equalizing charge - INA219
Voltage/current monitoring - RT9193
3.3V voltage regulator - NDC7002N
Voltage translator
Others
- AO4407A
Battery protection MOS tube - Power port
12.6 2A power input - Power output switch
- Batteries series power output
- 5V power output
- Reverse warning indicators
- Multi-functional expansion header
- I2C level selection
3.3V (default) / 5V
SAFETY CAUTIONS
- Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they’re not properly recharged or used.
- Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery.
- Do not mix use old batteries with new ones, avoid using batteries of different brands.
- When buying Lithium battery, should always make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test.
- Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first.
- Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.
Features At A Glance
- Adapting various interfaces via cables, easy to integrate into mobile robots or industrial control equipment
- I2C bus communication, monitoring the batteries voltage, current, power in real time
- Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
- Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi and Jetson Nano
- Batteries warning indicators, easy to check if the battery is connected correctly
- Comes with online development resources and manual
Specifications
| OUTPUT VOLTAGE | Batteries series voltage; 5V 5A; 3.3V 300mA |
|---|---|
| CONTROL INTERFACE | I2C |
| BATTERY SUPPORT | 3 x 18650 Li batteries (in series, NOT included) |
| CHARGER | 12.6V 2A |
| DIMENSIONS | 60 × 93mm |
| MOUNTING HOLE SIZE | 3.0mm |
Uninterruptible Power
It is able to charge the batteries and provide power output at the same time from external power supply
Automatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble
Monitoring The Batteries Voltage, Current And Power Via I2C
for reference only, the Raspberry Pi 4B and the batteries are NOT included.
Safe And Stable Circuit Design
Protection Circuits For Over Charge/Discharge, Over Current, Short Circuit, And Reverse
Along With The Equalizing Charge Feature, More Safe And Stable
Adapting Various Interfaces Via Cables
Easy To Integrate Into Mobile Robots Or Industrial Control Equipment
Battery Warning Indicators
Easy To Check If The Battery Is Connected Correctly
Interface Definition
