New
USB към RS232/RS485 конвертор – FT232RNL Chip, Industrial Grade Isolated Converter, Multiple Protection, Wall-mount and Rail-Mount Support
36.00 лв. (18.41 €) с вкл. ДДС
В наличност
Комплектът съдържа:
- Модул USB TO RS232/485 (B) – 1бр.
- USB кабел USB-A male to USB-B male – 1 бр.
Характеристики:
- Конвертор USB към RS232 / RS485 интерфейс
- FT232RNL chip. Supports Mac, Linux, Android, Windows 7/8/8.1/10/11
- Захранване: 5V от USB интерфейса
- Индустриален дизайн със защитни вериги: Power supply isolation, Digital isolation, TVS (Transient Voltage Suppressor), Self-recovery fuse, Protection diodes
- USB конектор: USB-B Female
- RS232/RS485 интерфейс конектор: клема
- Джъмпер за on/off на резистор 120ома за RS485 интерфейса
- Пластмасов корпус с възможност за монтаж към DIN шина или на стена
- Размери: 82х54х32
Допълнителна информация:
- USB to RS232/485 Industrial Grade Isolated Converter, Onboard Original FT232RNL Chip, Multiple Protection, Wall-mount and Rail-Mount Support. Подробно описание
- USB TO RS232/485 (B) Wiki. Ръководство, документация, драйвери
Specifications
| PRODUCT TYPE | Industrial grade isolated USB to RS232/485 converter | |
|---|---|---|
| Host port | USB | |
| Device port | RS232/485 | |
| USB | Operating voltage | 5V |
| Connector | USB-B | |
| Protection | 200mA self-recovery fuse, output isolation | |
| Transmission distance | About 5m | |
| isolated RS232 | Connector | Screw terminal |
| Transmission distance | About 15m | |
| Transmission mode | Point-to-point | |
| Baud rate | 300bps ~ 921600bps | |
| isolated RS485 | Connector | Screw terminal |
| Direction control | Hardware automatic control | |
| Protection | 600W lightningproof and surge-suppress, 15KV ESD protection (onboard 120R balancing resistor) | |
| Transmission distance | About 1.2km (low rate) | |
| Transmission mode | Point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more) | |
| Baud rate | 300bps ~ 921600bps | |
| LED indicators | PWR | Red power indicator, lights up when there is USB connection and voltage is detected |
| TXD | Green TX indicator, lights up when the USB port sends data | |
| RXD | Blue RX indicator, lights up when the device ports send data back | |
| Operating environment | Temperature | -15℃ ~ 70℃ |
| Humidity | 5%RH ~ 95%RH | |
| Operating system | Mac, Linux, Android, WinCE, Windows 11 / 10 / 8.1 / 8 / 7 | |
| Appearance | Enclosure | Rail-mount ABS case, suitable for 35mm DIN rail |
| Dimensions | 81.9 × 54.0 × 32.0mm | |
Onboard Original Chips
Onboard original FT232RNL chips, providing better stability and compatibility
Galvanic isolated Design
- Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
- Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
Multiple Protection, Safe And Stable
Onboard TVS (Transient Voltage Suppressor), effectively suppresses surge voltage and transient spike voltage in the circuit, lightningproof & ESD protection. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock proof performance.
Interface Introduction
Wall-mount And Rail-Mount Support
Outline dimensions
